Scale … 1:72
Part number ……… 02402
Release date …… Around May 11, 2022
Number of parts … 63
Model total length … 277mm
model Overall width … 162mm
In commemoration of the 200th anniversary of the founding of the United States, the
Weissen color F-106A is reproduced as a set of two!
Decal (marking)
Aerospace Defense Command 49th Combat Intercept Squadron 200th Anniversary Painting Machine “90076” (1976)
318th Combat Interception Squadron 200th Anniversary Commemorative Painting Machine “80776” (1976)
Scale … 1:48
Part number ……… PT18
Release date …… Around May 12, 2022
Scale … 1: 200
Part number ……… 29
Release date … Around May 12, 2022
Number of parts … 60
Model total length … 312mm model
Overall width … 157mm
Scale … 1:48
Release date …… Around May 18, 2022
Scale … 1:48
Part number ……… 07509
Release date …… Around May 18, 2022
Model overall length … 328mm
Model overall width … 244mm
By adding resin parts, the prototype No. 4 belonging to ADTW is reproduced!
This machine is equipped with measurement cameras at four locations on the underside of the fuselage, front, back, left and right, in order to test shooting, bombing, and loittering.
Measuring equipment is mounted on the rear seats, making it a single seat.
Resin parts
Camera fairing (× 4)
Blade antenna
Rear seat cover
Video camera
Decal (marking)
Japan Air Self-Defense Force Flight Development Experiment Team Technical Research and Development Institute F-2 Prototype Unit 4 “102”
Scale … 1: 200
Part number ……… SP526
Release date …… Around May 18, 2022
Number of parts … 14
Model total length … 87mm model
Overall width … 58mm
A limited edition with the mission STS-109 emblem is now available!
The Hubble Space Telescope, whose solar panel was replaced with a new type (short paddle type) in March 2002, will celebrate its 20th anniversary in March 2022.
The parts color of the Hubble Space Telescope body is silver-plated.
Comes with a clear blue molded stand.
■ Mission STS-109 mark
(embroidery type with a top and bottom of about 10 cm)
Scale … 1: 450
Part number ……… Z02
Release date …… Around May 19, 2022
Number of parts … 155
Model total length … 372mm model
Overall width … 52mm
Scale … 1:72
Part number ……… E42 Release date …… Around May 19, 2022
Number of parts … 68
Model total length … 217.5mm
Overall width of the model … 148mm
A type A, which is an Air Force specification of the F-35, is made into a kit. By reproducing the closed state of the weapon bay door, the number of parts can be kept small and it can be assembled in a short time. In addition, the legs are selectable between parked and flying. If you close the leg cover, you can assemble it in a short time.
The kit comes with an exhibition stand, so you can easily decorate it in flight. The canopy can be opened and closed, and a pilot figure in a sitting position is included. A small device (x4) attached to the upper and lower surfaces behind the aircraft during the test flight is also made into parts.
Smoke-colored canopy parts
Decal (marking)
US Air Force 53rd Wing 53rd Test and Evaluation Air Group 422 Test and Evaluation Squadron “Green Butts” belonging aircraft “OT 422TES” (Nellis Air Force Base: 2013)
For one other aircraft
Scale … 1:72
Part number ……… C6
Release date …… Around May 21, 2022
Scale … 1:72
Release date …… Around May 21, 2022
Number of parts … 70
Model total length … 160mm
model Overall width … 204mm
Reproduce the air defense fighter type III type B + 丙 of the Hyakushiki Detective!
Type III Otsu is an air defense fighter type equipped with two 20mm cannons on the nose, and one with an additional 37mm cannon as an upward gun on the upper center of the fuselage is called Type III Otsu + Hei. I did.
Decal (marking)
Type III Otsu + Hei: Independent Flight 16th Company (2nd generation) Affiliated aircraft “24” (Osaka Taisho Airfield: 1945)
For one other aircraft
Scale … 1:72
Part number ……… 02403
Release date …… Around May 21, 2022
Number of parts … 142
Model total length … 267 mm
model Overall width … 179mm
Reproduce the blue scheme equipped with the 40th anniversary painting tank!
Set the exposed arresting hook parts.
Decal (marking)
Air Self-Defense Force flight guidance group belonging machine “082” (2021)
JAL Express Boeing 737-800
Scale … 1: 200
Part number ……… 39
Release date … Around May 25, 2022 B
Number of parts … 47
Model total length … 197.5mm
Overall width of the model … 179mm
JAL’s new marking machine, B737-800, which revived “Tsurumaru”, will be made
into a kit! The Tsurumaru mark has deeper wing cuts than the previous one, and the
JAL characters use a powerful and thick Gothic typeface.
Decal (marking)
Japan Airlines new logo (Tsurumaru)
Scale … 1:72
Part number ……… A1
Release date …… Around May 26, 2022
Scale … 1:72
Part number ……… B1
Release date …… Around May 26, 2022
HobbyLink International
Hoblylink International Shop
eBay Store